 Let Hello Kitty® cure your Gel-X! Playful and bold, t his adorable limited edition Hello Kitty® Omni Light features a removable silicone head that creates a special bow-shaped light . Used either as a flash curing wand or a standing self-cure light, the Hello Kitty® Omni Light can work in multiple direction to easily cure your Gel-X® set. With its stabilizing feet and extendable head, the Hello Kitty® Omni Light is sure to become your favorite tool for effortless and adorable curing. WHAT'S INCLUDED Hello Kitty® Omni Light Hello Kitty® silicone head USB-C Charger Instruction and warranty manual DIRECTIONS Simply point the light and press the button for 60 sec of light to cure each nail. The Omni Light can be charged by USB and work up to 60 minutes once fully charged. CAUTION Keep out of reach of children! This is not a toy. For Professional use only. Discontinue use if sensitivity of irritation occurs. Wattage 3W Size 128 x 19 x 15.45mm Weight 31g Wavelength 395-405nm Battery Capacity 220 mAh Input Power DC Output Port USB-C HOW TO USE OMNI LIGHT SAFELY For happy curing, always adhere to these guidelines to ensure safety and to prolong the lifespan of the Omni Light battery. Before charging and using your Omni Light, make sure you’re doing it safely. How to Charge Omni Light 1. Always use the charger that comes with Omni Light. Use the certified 5V2A charger that comes with the Omni Light – other chargers can cause damage to the battery or pose safety hazards. 2. Do not overcharge Omni Light. Disconnect the Omni Light from its charger once it is fully charged. Do not leave Omni Light charging continuously for extended periods (unplug within 1-2 hours after full charge) to prevent overheating, reduced performance, or safety risks. 3. Promptly recharge Omni Light when it runs out of battery. Do not allow the Omni Light to remain at 0% battery for prolonged periods, as this may damage the battery or cause charging failure. Recharge promptly when the battery is low. 4. Don’t leave Omni Light to charge unattended. Stay near the Omni Light while charging to detect abnormalities such as overheating, unusual odors, or noises. In the event of charging abnormalities, unplug the device first to mitigate risks. 5. Don’t use Omni Light while it’s charging. Refrain from high-power tasks during charging to minimize overheating or charging irregularities. Where to Charge Omni Light 1. Not too hot, not too cold. Do not charge Omni Light in environments above 40°C (104°F) or under direct sunlight (e.g., in cars, near heaters) to prevent overheating or explosion risks. Similarly, charging in temperatures below 0°C (32°F) may impair battery performance. Charge within a moderate temperature range (10°C-30°C / 50°F-86°F). 2. Make sure there’s good ventilation. Charge Omni Light in a dry, well-ventilated area. Avoid charging Omni Light on beds, under blankets, or in enclosed spaces to prevent heat buildup. 3. Don’t store Omni Light in high heat. Do not store the device in high-temperature environments (e.g., a car in summer) to prevent safety hazards. 4. Keep Omni Light away from liquids and metals. Keep metal objects (e.g., keys, coins) away from the charging port to avoid short circuits. Protect the device and charger from water or liquids. 5. Recharge Omni Light when not in regular use. If the Omni Light is unused for extended periods, charge it at least once every three months to prevent battery failure due to self-discharge. What to Do if Omni Light Charges Irregularly 1. If Omni Light overheats… Immediately stop charging if the Omni Light or charger overheats abnormally. Check the charger and power outlet for issues. 2. If Omni Light has battery swelling, odors, or deformation… Discontinue use immediately if the battery bulges, emits unusual odors, or deforms. Contact Customer Service for assistance — do NOT continue charging or using the device. 3. If charging fails… If the Omni Light fails to charge, test with a different charger. If unresolved, contact Customer Service immediately. 

Shop All

Accessories

Gel-X®

Limited Edition

Aprés x Hello Kitty® and Friends

LED Lamps

Collabs

Omni Lights

Feb Flash Sale 2025

OrderlyEmails - Recommended Products

Memorial Day Sale 2025

title

Default Title

Hello Kitty® Omni Light

 Let Kuromi™ cure your Gel-X! Playful and mischievous, t his adorable limited edition Kuromi™ Omni Light features a removable silicone head that creates a special Kuromi™-shaped light . Used either as a flash curing wand or a standing self-cure light, the Kuromi™ Omni Light can work in multiple direction to easily cure your Gel-X® set. With its stabilizing feet and extendable head, the Kuromi™ Omni Light is sure to become your favorite tool for effortless and adorable curing. WHAT'S INCLUDED Kuromi™ Omni Light Kuromi™ silicone head USB-C Charger Instruction and warranty manual DIRECTIONS Simply point the light and press the button for 60 sec of light to cure each nail. The Omni Light can be charged by USB and work up to 60 minutes once fully charged. CAUTION Keep out of reach of children! This is not a toy. For Professional use only. Discontinue use if sensitivity of irritation occurs. Wattage 3W Size 128 x 19 x 15.45mm Weight 31g Wavelength 395-405nm Battery Capacity 220 mAh Input Power DC Output Port USB-C HOW TO USE OMNI LIGHT SAFELY For happy curing, always adhere to these guidelines to ensure safety and to prolong the lifespan of the Omni Light battery. Before charging and using your Omni Light, make sure you’re doing it safely. How to Charge Omni Light 1. Always use the charger that comes with Omni Light. Use the certified 5V2A charger that comes with the Omni Light – other chargers can cause damage to the battery or pose safety hazards. 2. Do not overcharge Omni Light. Disconnect the Omni Light from its charger once it is fully charged. Do not leave Omni Light charging continuously for extended periods (unplug within 1-2 hours after full charge) to prevent overheating, reduced performance, or safety risks. 3. Promptly recharge Omni Light when it runs out of battery. Do not allow the Omni Light to remain at 0% battery for prolonged periods, as this may damage the battery or cause charging failure. Recharge promptly when the battery is low. 4. Don’t leave Omni Light to charge unattended. Stay near the Omni Light while charging to detect abnormalities such as overheating, unusual odors, or noises. In the event of charging abnormalities, unplug the device first to mitigate risks. 5. Don’t use Omni Light while it’s charging. Refrain from high-power tasks during charging to minimize overheating or charging irregularities. Where to Charge Omni Light 1. Not too hot, not too cold. Do not charge Omni Light in environments above 40°C (104°F) or under direct sunlight (e.g., in cars, near heaters) to prevent overheating or explosion risks. Similarly, charging in temperatures below 0°C (32°F) may impair battery performance. Charge within a moderate temperature range (10°C-30°C / 50°F-86°F). 2. Make sure there’s good ventilation. Charge Omni Light in a dry, well-ventilated area. Avoid charging Omni Light on beds, under blankets, or in enclosed spaces to prevent heat buildup. 3. Don’t store Omni Light in high heat. Do not store the device in high-temperature environments (e.g., a car in summer) to prevent safety hazards. 4. Keep Omni Light away from liquids and metals. Keep metal objects (e.g., keys, coins) away from the charging port to avoid short circuits. Protect the device and charger from water or liquids. 5. Recharge Omni Light when not in regular use. If the Omni Light is unused for extended periods, charge it at least once every three months to prevent battery failure due to self-discharge. What to Do if Omni Light Charges Irregularly 1. If Omni Light overheats… Immediately stop charging if the Omni Light or charger overheats abnormally. Check the charger and power outlet for issues. 2. If Omni Light has battery swelling, odors, or deformation… Discontinue use immediately if the battery bulges, emits unusual odors, or deforms. Contact Customer Service for assistance — do NOT continue charging or using the device. 3. If charging fails… If the Omni Light fails to charge, test with a different charger. If unresolved, contact Customer Service immediately. 

Best Sellers

Kuromi™ Omni Light

 Never has flash curing been so easy! Used either as a flash cure wand or a standing self-cure light, the Omni Light can work in multiple directions to easily cure your Gel-X set. Just simply point the light and press the button to cure each nail. The Omni Light can be conveniently charged by USB and work for 60 minutes once fully charged. With its stabilizing feet and extendable head, the Omni Light is sure to become your favorite tool for effortless curing! Wattage 3W Size 128 x 19 x 15.45mm Weight 31g Wavelength 395-405nm Battery Capacity 220 mAh Input Power DC Output Port USB-C HOW TO USE OMNI LIGHT SAFELY For happy curing, always adhere to these guidelines to ensure safety and to prolong the lifespan of the Omni Light battery. Before charging and using your Omni Light, make sure you’re doing it safely. How to Charge Omni Light 1. Always use the charger that comes with Omni Light. Use the certified 5V2A charger that comes with the Omni Light – other chargers can cause damage to the battery or pose safety hazards. 2. Do not overcharge Omni Light. Disconnect the Omni Light from its charger once it is fully charged. Do not leave Omni Light charging continuously for extended periods (unplug within 1-2 hours after full charge) to prevent overheating, reduced performance, or safety risks. 3. Promptly recharge Omni Light when it runs out of battery. Do not allow the Omni Light to remain at 0% battery for prolonged periods, as this may damage the battery or cause charging failure. Recharge promptly when the battery is low. 4. Don’t leave Omni Light to charge unattended. Stay near the Omni Light while charging to detect abnormalities such as overheating, unusual odors, or noises. In the event of charging abnormalities, unplug the device first to mitigate risks. 5. Don’t use Omni Light while it’s charging. Refrain from high-power tasks during charging to minimize overheating or charging irregularities. Where to Charge Omni Light 1. Not too hot, not too cold. Do not charge Omni Light in environments above 40°C (104°F) or under direct sunlight (e.g., in cars, near heaters) to prevent overheating or explosion risks. Similarly, charging in temperatures below 0°C (32°F) may impair battery performance. Charge within a moderate temperature range (10°C-30°C / 50°F-86°F). 2. Make sure there’s good ventilation. Charge Omni Light in a dry, well-ventilated area. Avoid charging Omni Light on beds, under blankets, or in enclosed spaces to prevent heat buildup. 3. Don’t store Omni Light in high heat. Do not store the device in high-temperature environments (e.g., a car in summer) to prevent safety hazards. 4. Keep Omni Light away from liquids and metals. Keep metal objects (e.g., keys, coins) away from the charging port to avoid short circuits. Protect the device and charger from water or liquids. 5. Recharge Omni Light when not in regular use. If the Omni Light is unused for extended periods, charge it at least once every three months to prevent battery failure due to self-discharge. What to Do if Omni Light Charges Irregularly 1. If Omni Light overheats… Immediately stop charging if the Omni Light or charger overheats abnormally. Check the charger and power outlet for issues. 2. If Omni Light has battery swelling, odors, or deformation… Discontinue use immediately if the battery bulges, emits unusual odors, or deforms. Contact Customer Service for assistance — do NOT continue charging or using the device. 3. If charging fails… If the Omni Light fails to charge, test with a different charger. If unresolved, contact Customer Service immediately. 

Anniversary Sale

SMS Promo Electronics

Pro Pass

Omni Light

 Enjoy a premium salon-quality lamp without the premium salon prices with our Beta LED Lamp. But don’t let the price fool you. Like its stronger sister lamp, Beta is also offered in an acetone-resistant shell in black, white, or nude. It is equipped with three different timer settings, a removable magnetic base, and a USB port. So whether you’re a newbie nail enthusiast or a veteran nail tech, our Beta is sure to fit all budgets and all needs! FEATURES: Full coverage for 5-finger curing Preset timer with button-lock function for 10, 30, and 60 seconds, with a gradual power upswing at 60 seconds to reduce heat spikes 36 watts - powerful enough to cure most LED gels in 30 seconds Acetone-resistant shell Additional USB port to power external devices Pedicure-friendly with magnetic removable base plate One-year warranty Note: The Beta is not cordless or rechargeable. 

Electronics

Beta

Beta LED Nail Lamp - Black

 Enjoy a premium salon quality lamp without the premium salon prices with our Beta LED Lamp. But don’t let the price fool you. Like its stronger sister lamp, Beta is also offered in an acetone resistant shell of black, white, or nude. It is also equipped with three different timer settings, a removable magnetic base, and a USB port. So whether you’re a newbie nail enthusiast or a veteran nail tech, our Beta is sure to fit all budgets and all needs! FEATURES: - Full coverage for 5 finger curing - Preset timer with button-lock function of 10, 30, 60 sec with a gradual power upswing at 60 sec to reduce heat spikes - 36 watts — powerful enough to cure most LED gels in 30 sec - Acetone-resistant shell - Additional USB port to power external devices - Pedicure-friendly with magnetic removable base plate - One year warranty The Beta is not cordless/rechargeable 

New Year Sale 2025 Top Sellers

Beta LED Nail Lamp - Nude

Beta LED Nail Lamp - White

 Versatile x Powerful x Functional A leader in the field of multi-functional and powerful LED lamps, the Alpha 2-in-1 LED lamp is as innovative and revolutionary as our Gel-X™ tips. The new and improved Alpha 2-in-1 LED lamp is not only stylish but was designed with the sole purpose of creating the best and most functional professional nail lamp. The Alpha 2-in-1 LED Lamp is offered in two different acetone-resistant shades—black, nude, and white. It is also equipped with four different timer settings, including a 45 sec gradual upswing setting for those with more sensitive nail beds. A magnetic base and its cordless option makes it easy to move this lamp from the nail station to the pedicure station. And the second generation 2-in-1 Alpha LED lamp is also able to mix and match with any of the new Omega Flash Cure Lights. So nail professionals can create a truly custom LED lamp found unlike anywhere else in the market. FEATURES: -Cordless and rechargeable -Main unit holds a charge up to 75 minutes and detachable cure wand holds a charge up to 4 hours -Full coverage for 5 finger curing -Preset timer with button-lock function of 5, 20, 30, and a gradual power upswing 45 seconds to reduce heat spikes -36 watts- powerful enough to cure most LED gels in 30 sec -Additional USB port to power external devices -Built in handle for on-the-go ease -Pedicure-friendly with magnetic removable base plate -One year warranty Limited Quantity Available Disclaimer: Alpha 2-in-1 LED Lamp only compatible with provided Alpha charger. Improper usage, charging, and/or storage may result in permanent damage to the units. 

Alpha

color

Black

Nude

White

Alpha 2-in-1 LED Nail lamp

 Reliable Power Supply – Designed for the Omni Light (SKU: AP-LED-OML-GLD), this charger provides efficient power delivery to keep your device working seamlessly. Wide Compatibility – Supports 5V 0.5A max input, compatible with various power sources for versatile use. Optimal Operating Temperature – Works safely within 0°C to 40°C (32°F to 104°F) for stable performance. Safe Storage Guidelines – Store between -20°C to 60°C (-4°F to 140°F) to maintain charger longevity and prevent damage. Designed for Durability – Built for the Omni Light (SKU: AP-LED-OML-GLD) to provide a secure and reliable connection for continuous use. The Omni Light Charger (SKU: AP-6OMCH) is designed to provide reliable power for the Omni Light (SKU: AP-LED-OML-GLD), ensuring seamless operation and consistent performance. With an input range of 5V 0.5A max, this charger is compatible with a variety of power sources, offering versatility whether used at home or in a professional setting. It operates safely within a temperature range of 0°C to 40°C (32°F to 104°F), with some high-quality chargers supporting up to 45°C (113°F). To maintain the longevity and efficiency of the charger, it is recommended to store it between -20°C to 60°C (-4°F to 140°F) when not in use, avoiding exposure to extreme heat or cold to protect internal components. Whether you're replacing an existing charger or keeping a backup on hand, the Omni Light Charger is engineered to ensure your Omni Light device stays powered and ready for use, making it an essential accessory for continuous curing. 

Replacement Charger for Omni Light

 Reliable Power Supply – Designed for the Beta LED Nail Lamp, this adapter delivers a steady 24V 1500mA output for consistent performance. Universal Compatibility – Supports 100V-240V (50/60Hz, 1.0A max), making it ideal for use in salons and at home. Optimized Performance – Functions best in 0°C to 40°C (32°F to 104°F), ensuring safe and efficient operation. Safe Storage Guidelines – Store between -20°C to 60°C (-4°F to 140°F) to prevent damage and extend longevity. Designed for Apres Nail – Made specifically for the Beta LED Nail Lamp (SKU: APELED-BK, APELED-NU, APELED-WT) for a secure and reliable fit. The Apres Nail Beta LED Lamp Adapter is a high-quality replacement power supply designed specifically for the Beta LED Nail Lamp (SKU: APELED-BK, APELED-NU, APELED-WT). With an input range of 100V-240V (50/60Hz, 1.0A max), this adapter is built for versatility, making it ideal for professional salon settings and at-home nail enthusiasts alike. Delivering a 24V 1500mA output, it provides consistent power for smooth, even curing. Engineered for durability, it operates safely in temperatures ranging from 0°C to 40°C (32°F to 104°F), with some high-quality chargers supporting up to 45°C (113°F). Proper storage is key to maintaining longevity—avoid extreme temperatures and keep it within -20°C to 60°C (-4°F to 140°F) to prevent internal component degradation. Whether you’re replacing a lost adapter or need a backup for your setup, this charger ensures uninterrupted performance for flawless gel applications. 

New Arrivals

Replacement Charger for Beta LED Lamp Adapter

 Reliable Power Supply – Designed for the Alpha 2-in-1 LED Nail Lamp, this charger delivers a steady 12V 3A (36W) output for consistent, even curing. Universal Compatibility – With an input range of 100V-240V (50/60Hz, 1.0A max), it works worldwide, making it perfect for salons and at-home nail artists. Optimized Performance – Best used in 10°C to 30°C (50°F to 86°F) to maintain efficiency and extend battery life. Safe &amp; Durable Storage – Store in 15°C to 25°C (59°F to 77°F) to prevent battery degradation and ensure long-term reliability. Apres Nail Quality – Designed to keep your Alpha 2-in-1 LED Nail Lamp (SKU: APLED-BK-V2, APLED-NUDE-V2, APLED-WT-V2) powered for flawless gel applications. Keep your Alpha 2-in-1 LED Nail Lamp powered with the Apres Nail LED Gel Lamp Charger, designed for efficiency, longevity, and reliable performance. With a universal input range of 100V240V (50/60Hz, 1.0A max), it seamlessly adapts to different power sources, making it ideal for both professional salons and at-home nail artists. Delivering a 12V 3A (36W) output, this charger provides a stable power flow to ensure smooth, even curing. Engineered for optimal performance, it operates best between 10°C to 30°C (50°F to 86°F) and should be stored between 15°C to 25°C (59°F to 77°F) to maintain battery longevity. Compatible with the Alpha 2-in-1 LED Nail Lamp (SKU: APLED-BK-V2, APLED-NUDE-V2, APLED-WT-V2), this charger is a must-have for maintaining uninterrupted nail services and flawless gel applications. 

Replacement Charger for Alpha 2-in-1 LED Lamp

 Reliable Power Supply – Designed for the Omega Mini Flash Cure Light, this charger ensures efficient power delivery for optimal performance. Versatile Compatibility – Also compatible with the Alpha 2-in-1 LED Nail Lamp (SKU: APLED-BK-V2, APLED-NUDE-V2, APLED-WT-V2), providing flexibility for various devices. Safe Operating Temperature – Works within 0°C to 40°C (32°F to 104°F) to maintain smooth operation and prevent overheating. Safe Storage Conditions – Store between -20°C to 60°C (-4°F to 140°F) for optimal charger performance and to avoid damage from extreme temperatures. Durable &amp; Efficient – Built for longevity, this charger is designed to provide steady power for your nail equipment, ensuring consistent and reliable performance. The Omega Mini Flash Cure Light Charger (SKU: AP-FLASH-CABLE) is a high-performance power supply designed to keep your nail equipment running efficiently. Compatible with the Omega Mini Flash Cure Light, it also works seamlessly with the Alpha 2-in-1 LED Nail Lamp (SKU: APLED-BK-V2, APLED-NUDE-V2, APLED-WT-V2), making it a versatile addition to your nail care tools. With an input range of 5V 0.4A max, this charger ensures reliable power delivery for smooth operation. It functions optimally within a temperature range of 0°C to 40°C (32°F to 104°F), supporting efficient charging and reducing the risk of overheating. For the best performance and longevity of the charger, it should be stored between -20°C to 60°C (-4°F to 140°F) when not in use, as exposure to extreme temperatures can degrade the internal components. Whether you're using it with the Omega Mini Flash Cure Light or the Alpha 2-in-1 LED Nail Lamp, this charger provides steady, consistent power to help keep your nail equipment functioning at its best. It’s an essential tool for nail technicians looking to ensure smooth, uninterrupted service for their clients. 